Theme

Gemlite

Image

Overview

The improved Gemlite is a specialised dual function, recessed modular luminaire dedicated to the lighting of intensive care units. The Gemlite has been developed with the assistance of ICU specialists.

Features

  • Offers two distinct light levels from one fitting. Thus meeting CIBSE recommendations for bedded areas and examinations
  • Rapid switching to higher light intensity via G100/3 dimming controller
  • Designed to comply with clean room standards with clear acrylic cover to facilitate cleaning
  • Ceiling mounted and therefore independent of mobile ICU equipment, there is an absence of interference with sensitive monitoring or diagnostic systems
  • Supplied with side arm fixing brackets as standard, to facilitate fixing in plasterboard or exposed 'T' ceilings. Alternatively, drop rods may be fitted
  • Surface mounted versions available to order (please refer to our technical department for special installation requirements)
  • IP54 rated
  • 4000K lamps recommended for hospital use

Materials and Finishes

Body1mm Zintec Steel
ControllerAsymmetric Square Cell Panel and a Prismatic Panel
FinishWhite

Technical Details

GearHigh Frequency and High Frequency Dimmable (Requires use of G100/3 Dimming Controller)
Lamp Type
  • PLLPLL

Dimensions

Gemlite Dimensional Diagram
 LWR
Gemlite677598145
C (Cut Out)575575-

Design

Gemlite General Illumination

CIBSE recommended illuminance levels for bedded area lighting is 400 lux

Gemlite Exam Illumination

CIBSE recommended illuminance levels for examination lighting is 1000 lux

Please note that the proposed location for optimum designed performance of this luminaire is determined by the following parameters

It is vital that the bed position and the luminaire position are accurately located in relation to each other at the design and installation stages

Ordering

All versions supplied excluding lamps.

Order CodeDescriptionLamp Type & RatingGearWeight (kg)
GE455D/2Gemlite4x55W PLLHF+HFD15.2

Emergency

EMaintained 3hr Emergency Integral

Accessories

G100/3Dimming Controller (required as standard)
European Conformity Mark Fuse Protected Isolation Class 1 Suitable for mounting on flammable surfaces Protected against dust and splashing water