DC100
Overview
The DC/100 is a rotary dimming controller supplied complete with switch. The DC/100 is required to operate high frequency analogue 1-10V controlled dimmable luminaires.
Features
- Single pole, 2 way switch
- Separate rotary dimming controller
- Rotary control for dimming up to 60 ballasts
- Dimming from 100% down to the minimum level determined by the ballast and lamp type (please consult our technical department for details).
- Suitable for flush or surface mounting installation.
Technical Details
| Potentiometer | 2 screw terminals for 1-10V DC. Maximum cable 0f 1.0mm², stranded cable. |
| Mains switch | 20A nominal rating (15 ballasts max.), single gang, single pole, two way. |
| Terminals | 4.0mm² conductors. A terminal is provided on the metal plate for earthing. |
| Mounting | Suitable for installation on a 72x72x41mm BS box (not supplied) |
Dimensions
| W | H | |
|---|---|---|
| DC/100 | 90 | 90 |
Ordering
| Order Code | Description |
|---|---|
| DC/100 | Dimming Controller & Switch. Analogue 1-10V |
Some luminaires have more than one ballast, if there is any doubt, please consult our techincal department. If more than 15 luminaires are to be operated then an additional relay or contactor should be used.
The 1-10V DC control cable should be mains insulated and run separately, or screened from the mains cable.
Please note that Apollo recommend that new lamps are conditioned at full output for 100 hours prior to being dimmed. See Dimming Fluorescent Lamps for further information.