The MC200 has been specifically designed for use with the Apollo Multicare Luminaire (see healthcare section), in order to meet the three lighting level requirements necessary for overbed illumination. These being 'Patient Reading' appropriate for day to day use; 'Inspection' lighting and 'Examination' lighting.
Suitable for flush or surface mounting installation as required.
- To achieve patient reading lighting as described above, turn on switch 'A' (see diagram).
- To achieve inspection lighting, turn on switch 'B' (see diagram).
- To achieve examination lighting, turn on both switch 'A' and switch 'B' and turn switch 'A' to full output.
|White Push To Make Switch Contacts||10A nominal rating, single gang, single pole, normally open|
|White Push To Make Switch Terminals||4.0mm² conductors|
|White Mains Switch Contacts||20A nominal rating, single gang, single pole, two way|
|White Mains Switch Terminals||4.0mm² conductors|
|Mounting||Suitable for installation on 72x72x41mm deep single gang back box (not supplied)|
|MC200||Multicare dimming controller|
Please note that Apollo recommend that new lamps are conditioned at full output for 100 hours prior to being dimmed. See Dimming Fluorescent Lamps for further information.