• Actilume is an afforadable automatic dimming system that rewards you with automatic energy savings
• 50% to 80% of the total cost of a lighting system is spent on energy consumption. Depending on the application, savings of up to 75% on energy expenditure can be realised
• These savings of up to 75% will also have a significant impact on the reduction of CO2 emissions and help towards the reaching of new energy directives and Kyoto targets
• The lighting is automatically regulated, adapted the light schemes to use the surrounding office environment
• If desired, the settings can be overruled according to personal preferance through a push button or remote control
• Actilume is a future-proof system. It combines the requirements from the building directive 2002/91/CCE, that stimulates energy savings, and the European Norm EN12464, that stimulates ergonomics, into one easy solution.

• A simple push on the service button is enough to set up the system for cell or open plan offices, these modes cover 80% of all applications
• Other applications can be chosen via a point-and-shoot mode selection tool recalling factory programmed modes
• The Actilume controller contains two DALI outputs. These outputs are pre-programmed as a window or corridor row with a fixed light offset. Therefore the Actilume system does not require complicated programming

The Actilume interactive fluorescent control system offers the following functionalities:

• Daylight regulation

  Automatically adapts to the surrounding conditions by maintaining a constant light level and dimming the light to the room's natural light level

• Occupany control

  When the room is vacated for a certain time and no movement is detected, the lights will either switch off in case of a cell, or be dimmed down in case of an open plan.

• Personal light

  It is possible to connect a push button or to use a simple remote control (On/Off, Up/Down) to manual override the factory settings.

• Sensor service button

  1st push open plan office (and then the lights blink twice). 2nd push back to cell office (and then the lights blink once)