The C1MW models have been designed to be an easy to fit cost effective microwave detector solution.

Unlike fixed head microwave detectors the C3MW offers a unique presence / absence detection capability by using an adjustable head.

The C6MW is a mid-range microwave presence / absence detector for the automatic control of lighting, heating and ventilation.

The range of CHS handsets cover from basic handset for the end users so they can over-ride the lighting control up to a programming handset that can be used to program multiple sensors from the same handset.

These compact detectors provide automatic control for lighting, heating and ventilation loads. The detector can be mounted either flush into a ceiling tile or using a surface mounting box.

This DMX controller is simple to operate and has functions which are not normally found on a controller of this size. This gives a higher degree of flexibility and the option of controlling more than just colour change units.

DALI is an addressable communications protocol. DALI stands for Digital Addressable Lighting Interface and is part of IEC 60929 Annex E. DALI originally appeared in the market place in the mid nineties and has been used, up till 2009, in relation to dimming applications. The DALI standard has been updated and covers a section for emergency lighting.

The dc/100 is a rotary dimming controller supplied complete with switch. The dc/100 is required to operate high frequency analogue 1-10V controlled dimmable luminaires.

It has always been possible to dim fluorescent lamps, all that is required is to reduce the lamp current within the lamp after the discharge arc within the lamp has struck.

The G100/2 has been specifically designed for use with the Apollo Gemlite (see healthcare section), in order to meet the three lighting level requirements necessary for intensive care overbed illumination.

The Apollo range of Manual Dimming control plates offering a versatile solution for control of DSI and DMX lighting installations. The control plates are available with one, two, three and four channels (the four channel version is available as 3 channels and a master).

The MC100 has been specifically designed for use with the Apollo Multicare Luminaire (see healthcare section), in order to meet the three lighting level requirements necessary for overbed illumination. These being 'Patient Reading' appropriate for day to day use; 'Inspection' lighting and 'Examination' lighting.

The MC200 has been specifically designed for use with the Apollo Multicare Luminaire (see healthcare section), in order to meet the three lighting level requirements necessary for overbed illumination. These being 'Patient Reading' appropriate for day to day use; 'Inspection' lighting and 'Examination' lighting.

Actilume is an afforadable automatic dimming system that rewards you with automatic energy savings.